Ip Access-List Extended - Dell PowerConnect W-7200 Series Reference Manual

ip access-list extended

ip access-list extended {<number>|<name>}
deny <protocol> <source> <dest>
ipv6
no ...
permit <protocol> <source> <dest>
Description
This command configures an extended access control list (ACL). To configure IPv6 specific rules, use the
keyword for each rule.
Syntax
Parameter
extended
ipv6
deny
<protocol>
<source>
<dest>
no
permit
<protocol>
<source>
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enter a name, or a number in the specified range.
Use the ipv6 keyword to add IPv6 specific rules.
Reject the specified packets.
Protocol, which can be one of the following:
Protocol number between 0-255
l
any: any protocol
l
icmp: Internet Control Message Protocol
l
igmp: Internet Gateway Message Protocol
l
tcp: Transmission Control Protocol
l
udp: User Datagram Protocol
l
Source, which can be one of the following:
Source address (IPv4 or IPv6) and wildcard
l
any: any source
l
host: specify a single host IP address
l
Destination, which can be one of the following:
Destination address (IPv4 or IPv6) and wildcard
l
any: any destination
l
host: specify a single host IP address
l
Negates any configured parameter.
Allow the specified packets.
Protocol, which can be one of the following:
Protocol number between 0-255
l
any: any protocol
l
icmp: Internet Control Message Protocol
l
igmp: Internet Gateway Message Protocol
l
tcp: Transmission Control Protocol
l
udp: User Datagram Protocol
l
Source, which can be one of the following:
Source address (IPv4 or IPv6) and wildcard
ipv6
Range
100-199, 2000-
2699
—
—
—
—
—
—
—
—
ip access-list extended | 349