Ip Access-List Standard - Dell PowerConnect W-7200 Series Reference Manual

ip access-list standard

ip access-list standard {<number>|<name>}
deny {<ipaddr> <wildcard>|any|host <ipaddr>}
no ...
permit {<ipaddr> <wildcard>|any|host <ipaddr>}
Description
This command configures a standard access control list (ACL).
Syntax
Parameter
standard
ipv6
deny
no
permit
Usage Guidelines
Standard ACLs are supported for compatibility with router software from other vendors. This ACL permits or denies
traffic based on the source address of the packet.
Example
The following command configures a standard ACL:
(host) (config) #ip access-list standard 1
permit host 10.1.1.244
Command History
Introduced in ArubaOS 3.0
Command Information
Platform
Available on all platforms
356 | ip access-list standard
Description
Enter a name, or a number in the specified range.
Use the ipv6 keyword to create IPv6 specific standard rules.
Reject the specified packets, which can be the following:
IP address and optional wildcard
any: any packets
host: specify a host IP address
Negates any configured parameter.
Allow the specified packets, which can be the following:
IP address and optional wildcard
any: any packets
host: specify a host IP address
License
Requires the PEFNG license
Range
1-99, 1300-1399
—
—
—
Command Mode
Config mode on master
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide