ipv6 neighbor
ipv6 neighbor <ipv6addr> vlan <vlan#> <mac>
Description
This command configures an IPv6 static neighbor on a VLAN interface.
Syntax
Parameter
<ipv6addr>
vlan
<vlan#>
<mac>
Usage Guidelines
You can configure an IPv6 static neighbor on a VLAN interface.
Example
The following command configures an IPv6 static neighbor on VLAN 1:
(host) (config) #ipv6 neighbor 2cce:205:160:100::fe vlan 1 00:0b:86:61:13:28
Command History
Introduced in ArubaOS 6.1
Command Information
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Specify the IPv6 address of the neighbor entry.
Specify the VLAN ID.
Specify the 48-bit hardware address of the neighbor entry.
License
Available in the base operating
system
Command Mode
Config mode on master controllers
ipv6 neighbor | 347