Ip Access-List Mac - Dell PowerConnect W-7200 Series Reference Manual

ip access-list mac

ip access-list mac {<number>|<name>}
deny {<macaddr>[<wildcard>]|any|host <macaddr>} [mirror]
no ...
permit {<macaddr>[<wildcard>]|any|host <macaddr>} [mirror]
Description
This command configures a MAC access control list (ACL).
Syntax
Parameter
mac
deny
no
permit
Usage Guidelines
MAC ACLs allow filtering of non-IP traffic. This ACL filters on a specific source MAC address or range of MAC
addresses.
If you configure the mirror option, define the destination to which mirrored packets are sent in the firewall policy.
For more information, see
Example
The following command configures a MAC ACL:
(host) (config) #ip access-list mac 700
deny 11:11:11:00:00:00
Command History
Release
ArubaOS 3.0
ArubaOS 3.3
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Configures a MAC access list. Enter a name, or a number in the specified
range.
Reject the specified packets, which can be the following:
MAC address and optional wildcard
any: any packets
host: specify a MAC address
Optionally, you can configure the mirror parameter, which mirrors packets to a
datapath or remote destination.
Negates any configured parameter.
Allow the specified packets, which can be the following:
MAC address and optional wildcard
any: any packets
host: specify a MAC address
Optionally, you can configure the mirror parameter, which mirrors packets to a
datapath or remote destination.
"firewall" on page 263.
Modification
Command introduced
The mirror parameter was introduced.
Range
700-799, 1200-1299
—
—
—
ip access-list mac | 351