Ipv6 Route - Dell PowerConnect W-7200 Series Reference Manual

ipv6 route

ipv6 route <ipv6-prefix/prefix-length> <ipv6-next-hop> <cost>
Description
This command configures static IPv6 routes on the controller.
Syntax
Parameter
<ipv6-prefix/prefix-
length>
<ipv6-next-hop>
<cost>
Usage Guidelines
You can configure static IPv6 routes on the controller.
Example
The following command configures a static IPv6 route on the controller:
(host) (config) #ipv6 route 2cce:205:160:100::fe/<64> 2cce:205:160:100::ff 1
Command History
Introduced in ArubaOS 6.1
Command Information
Platform
Available on all platforms
348 | ipv6 route
Description
Specify the IPv6 address and the prefix length of the destination.
Specify the next-hop IPv6 address or null 0 to terminate or discard the packets.
Specify the distance metric to select the routing protocol that determines the way to
learn the route.
License
Available in the base operating
system
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide