Cli User Access Levels; Multiple Concurrent Cli Users - Avaya Advanced Gateway 2330 Manual

For example, the following displays the commands required to select Ethernet interface in slot
0, port 1 for configuration.
AG2330# configure terminal
AG2330/configure# interface ethernet 0/1
Configuring existing Ethernet interface
AG2330/configure/interface/ethernet (0/1)#
The commands available differ depending on the particular object selected.

CLI user access levels

The CLI supports four levels of privilege.
Privilege level
1 (highest)
2
3
4 (lowest)

Multiple concurrent CLI users

A single user can issue commands through the console interface. In addition, multiple
concurrent users can issue commands through Telnet and SSH.
Important:
To avoid multiple users from issuing configuration commands simultaneously, only one user
is allowed to enter the configuration mode at one time. A console connection with a console
Using the Command Line Interface
Privilege name
PRIVILEGE_ADMIN
PRIVILEGE_CONFIGURE
PRIVILEGE_TEST
PRIVILEGE_NORMAL
CLI user access levels
Definition
Admin level Can access any
command and configure any
feature in the gateway, including
user configuration and
administration.
Configure level Can configure any
feature. Cannot add or delete
users.
Test level Can only run diagnostic
tests. Cannot access configuration
commands.
Normal level Can only enter
display
or commands.
show
August 2013 13