Show Iscsi Session Detailed - Dell Z9500 Reference Manual

Usage
Only sessions the switch observes are learned; sessions flowing through an
Information
adjacent switch are not learned.
After the switch is reloaded, any information exchanged during the initial
handshake is not available. If the switch picks up the communication after
reloading, it would detect a session was in progress but could not obtain complete
information for it. Any incomplete information of this type would not be available in
the show commands.
Related
•
Commands
•
•

show iscsi session detailed

Display detailed information on active iSCSI sessions on the switch.
Syntax
show iscsi session detailed [session isid]
Parameters
isid
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.6(0.0)
Example
Dell# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.44 33345
Session 1 :
----------------------------------------------------
iSCSI Optimization
show iscsi — displays the currently configured iSCSI settings.
show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
show run iscsi— shows run iscsi.
Enter the session's iSCSi ID to display detailed information
about the specified iSCSi session.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Initiator Target Target
IP Address TCPPort ID
10.10.0.101 3260
Connection
0
1021