Dell S4810 Reference Manual page 375

as-set
attribute-map
map-name
summary-only
suppress-map
map-name
Defaults Not configured.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
At least one of the routes included in the aggregate address must be in the BGP
Information
routing table for the configured aggregate to become active.
If routes within the aggregate are constantly changing, do not add the as-set
parameter to the aggregate as the aggregate flaps to keep track of the changes in
the AS_PATH.
In route maps used in the suppress-map parameter, routes meeting the deny
clause are not suppress; in other words, they are allowed. The opposite is also true:
routes meeting the permit clause are suppressed.
Border Gateway Protocol
(OPTIONAL) Enter the keyword as-set to generate path
attribute information and include it in the aggregate.
AS_SET includes AS_PATH and community information from
the routes included in the aggregated route.
(OPTIONAL) Enter the keywords attribute-map then the
name of a configured route map to modify attributes of the
aggregate, excluding AS_PATH and NEXT_HOP attributes.
(OPTIONAL) Enter the keyword summary-only to advertise
only the aggregate address. Specific routes are not
advertised.
(OPTIONAL) Enter the keywords suppress-map then the
name of a configured route map to identify which more-
specific routes in the aggregate are suppressed.
ROUTER BGP ADDRESS FAMILY
ROUTER BGP ADDRESS FAMILY IPv6
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
375