Dell S4810 Reference Manual page 370

Hide thumbs Also See for S4810:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.0.0

Version 8.3.8.0

Version 8.4.1.3

Version 8.2.1.0

Version 7.6.1.0

Version 7.5.1.0

Version 7.4.1.0

Dell#show bfd neighbors

Ad Dn - Admin Down

For a 10-Gigabit Ethernet interface, enter the keyword

tengigabitethernet then the slot/port information.

For a port-channel interface, enter the keyword port-

channel then a number. For the C-Series, Z-Series, and

S8410, the range is from 1 to 128.

For VLAN interfaces, enter the keyword vlan then a

number from 1 to 4094. For ExaScale VLAN interfaces,

the range is 1 to 2730 (VLAN IDs can be from 0 to 4093).

(OPTIONAL) Enter the keyword detail to view detailed

information about BFD neighbors.

EXEC Privilege

Introduced on the Z9000.

Introduced on the S4820T.

Added support for BFD for BGP on the S4810.

Added support for BFD for BGP on the E-Series ExaScale.

Introduced on the E-Series ExaScale.

Introduced on the C-Series.

Added support for BFD for VLAN and port-channel interfaces

on the E-Series.

Introduced BFD on physical ports on the E-Series.

- Active session role

- Static Route (RTM)

Interface State Rx-int Tx-int Mult

Bidirectional Forwarding Detection (BFD)