Policy-Map-Input - Dell S6000 Reference Manual

Parameters
qos-policy-
name
Defaults none
Command CONFIGURATION (policy-map-input and policy-map-output)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Usage If the rate shape exists in both aggregate and per-queue qos-policy, minimum of 2
Information take effect. Some of all Queue-rate will not exceed aggregate.
Related

policy-map-input

Commands
policy-map-output
policy-map-input
Create an input policy map.
S6000
Syntax
policy-map-input policy-map-name cpu-qos | [layer2]
To remove an input policy map, use the no policy-map-input policy-map-
name cpu-qos | [layer2] command.
Parameters
policy-map-
name
cpu-qos
layer2
Defaults Layer 3
Quality of Service (QoS)
Enter the name of the policy map in character format (32
characters maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— creates an input policy map.
— creates an output policy map.
Enter the name of the policy map in character format (32
characters maximum).
Enter the cpu-qos keyword to assign this ACL to control
plane traffic only.
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
1125