Display Logbuffer - H3C SR6600 Command Reference Manual

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information center configuration information.
<Sysname> display info-center
Information Center:enabled
Log host:
1.1.1.1,
port number : 514, host facility : local7,
channel number : 2, channel name : loghost
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 512,
current messages 512, dropped messages 0, overwritten messages 740
channel number : 4, channel name : logbuffer
Trap buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 216, dropped messages 0, overwritten messages 0
channel number : 3, channel name : trapbuffer
logfile:
channel number:9, channel name:channel9
syslog:
channel number:6, channel name:channel6
Information timestamp setting:
log - date, trap - date, debug - date,
loghost - date
Only devices that support the log file feature display the log file information after the execution of the
display info-center command.

display logbuffer

Use display logbuffer to display the state of the log buffer and the log information in the log buffer.
Without size buffersize, the command displays all log information in the log buffer.
Syntax
display logbuffer [ reverse ] [ level severity | size buffersize | slot slot-number ] * [ | { begin | exclude
| include } regular-expression ]
Views
Any view
205