Display Logbuffer - H3C s3600 series Command Manual

Log host
Console
Monitor
SNMP Agent
Log buffer
Trap buffer
Information timestamp setting:
IRF SWITCH OF Device--Unit>1

display logbuffer

Syntax
display logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameters
unit-id: Unit ID of the device.
level severity: Specifies an information severity level. The severity argument ranges from 1 to 8.
Table 1-2 Severity level defined in the information center
Severity
emergencies
alerts
critical
Field
Severity value
1
2
3
1-3
Description
Information about the log host, including its IP
address, name and number of information
channel, language and level of the log host
Information about the console port, including
name and number of its information channel
Information about the monitor port, including
name and number of its information channel
Information about SNMP Agent, including name
and number of its information channel
Information about the log buffer, including its
state (enabled or disabled), its maximum size,
current size, current messages, information
channel name and number, number of dropped
messages, and number of overwritten messages
Information about the trap buffer, including its
state (enabled or disabled), maximum size,
current size, current messages, channel number
and name, number of dropped messages, and
number of overwritten messages
Information about the time stamp setting,
showing the time stamp format of the log, trap
and debugging information
Information about the information output state of
the device (enabled or disabled), showing
whether the log, trap and debugging information
output are enabled on the device
The system is unavailable.
Information that demands
prompt reaction
Critical information
Description