Display Info-Center - H3C SR6600 Command Reference Manual

Usage guidelines
If no channel is specified, the command displays information about all channels.
Examples
# Display information about channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME
ffff0000 default
The output shows that the system is allowed to output log information with a severity from 0 to 4, trap
information with a severity from 0 to 7, and debug information with a severity from 0 to 7 to the console.
The information source modules are all modules (default).
Table 44 Command output
Field
channel number
channel name
MODU_ID
NAME
ENABLE
LOG_LEVEL
ENABLE
TRAP_LEVEL
ENABLE
DEBUG_LEVEL

display info-center

Use display info-center to display information center configuration information.
Syntax
display info-center [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
ENABLE LOG_LEVEL
Y informational
Description
Channel number in the range 0 to 9.
Channel name. For more information, see info-center channel name.
ID of the source module.
Name of the source module.
"default" means all modules are allowed to output system information, but
the actual modules depend on the device model.
Indicates whether log output is enabled, Y or N.
Log information severity. See
Indicates whether trap output is enabled, Y or N.
Trap information severity See
Indicates whether debug output is enabled, Y or N.
Debug information severity. See
ENABLE TRAP_LEVEL
Y debugging
Table 45
Table 45
Table 45
204
ENABLE DEBUG_LEVEL
Y debugging
for details.
for details.
for details.