Install The Agilent Measurement Manager - Agilent Technologies U2722A User Manual

1 Getting Started
D. Install the Agilent Measurement Manager
1 If you have done
2 Click Measurement Manager on the U2722A/U2723A Installation Menu to begin
3 If the installation menu does not appear after a few seconds, go to
4 Click OK to begin the installation.
5 If you do not have any of the prerequisites installed, the InstallShield
6 Click OK to begin the installation of the listed missing prerequisites.
7 Once the above installation has completed, installation of the
8 The Measurement Manager InstallShield Wizard dialog will appear. Click Next
9 Read the License Agreement and select I accept the terms in the License
10 Fill in the Customer Information Form accordingly and click Next.
16
"C. Install the module driver"
Step 2. If not, close all other applications on your PC and insert the
Product Reference CD-ROM into your CD-ROM drive.
the installation.
Start > Run and type <drive>:\Application\Modular Instruments
Measurement Manager\setup.exe where <drive> is your CD-ROM
drive location.
Wizard software prerequisite will appear.
Measurement Manager software will proceed as normal.
to begin.
Agreement to proceed. You may click Print to print a hardcopy of the
Agilent License Terms for reference. Click Next to proceed.
on page 15, proceed to
U2722A/U2723A User's Guide