Changing The Units And Measurement Rate - Agilent Technologies Agilent 86120B User Manual

Changing the Units and Measurement Rate

This section includes step-by-step instructions for changing the units and
measurement rate.
This section includes:
Displayed units 2-13
Measurement rate 2-14
Continuous or single measurements 2-15
Displayed units
As described below, it's easy to change the wavelength and amplitude units.
You can choose between the following units:
Table 2-1. Available Units
Wavelength
nm
–1
cm
THz
To change the units of measure
1 Press Setup.
2 Press the MORE softkey.
3 Press the UNITS softkey.
Using the Multi-Wavelength Meter
Changing the Units and Measurement Rate
Power
dBm
mW
µ
W
2-13