Banner Login - Dell Z9500 Reference Manual

banner and prompt appear. After the user has logged in, the banner EXEC (if
configured) displays.
Example
Dell(conf)#banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated
for user on line
console
This is the banner
Dell con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user on line
console
This is the banner
Dell>
Related
line
Commands

banner login

Set a banner to display when logging on to the system.
Syntax
banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Enter no banner login to delete the banner text.
Enter no banner login keyboard-interactive to automatically go to the banner
message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
c
line
Defaults No banner is configured and the CR is required when creating a banner.
88
— enables and configures the console and virtual terminal lines to the system.
Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
Enter a text string for your text banner message ending the
message with your delineator. The delineator is a percent
character (%). Range: maximum of 50 lines, up to 255
characters per line
Control and Monitoring