Banner Login - Dell MXL 10GbE Reference Manual

4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is
terminated for user on
line console
This is the banner
Dell Force10 con0 now available
Press RETURN to get started.
This is the banner
Related

banner login

Commands
banner motd
exec-banner
line
banner login
Set a banner to display when logging on to the system.
Syntax
banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive
c
line
Defaults No banner is configured and the CR is required when creating a banner.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage A login banner message displays only in EXEC Privilege mode after entering the
Information enable command then the password. These banners do not display to users in
EXEC mode.
Example
Dell(conf)#banner login ?
keyboard-interactive Press enter key to get prompt
LINE
80
— sets a banner for login connections to the system.
— sets a Message of the Day banner.
— Enables the display of a text string when you enter EXEC mode.
— enables and configures the console and virtual terminal lines to the system.
Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
Enter a text string for your text banner message ending the
message with your delineator. The delineator is a percent
character (%). Range: maximum of 50 lines, up to 255
characters per line
Introduced on the MXL 10/40GbE Switch IO Module.
c banner-text(max length 255) c, where
Control and Monitoring