Banner Login - Dell Z9500 Command Reference Manual

Version
E-Series
Usage After entering the banner exec command, type one or more spaces and a
Information
delineator character. Enter the banner text then the second delineator character.
When you connect to the router, if a message of the day banner is configured, it
displays first. If no message of the day banner is configured, the login banner and
prompt appear. After logged in, the EXEC banner (if configured) displays.
Example
Dell(conf)#banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated
for user on line
console
This is the banner
FTOS con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user on line
console
This is the banner
Dell>
Related
line
Commands

banner login

Set a banner to display when logging on to the system.
Z9500
Syntax
banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive
c
line
Control and Monitoring
Description
Original Command
— enables and configures the console and virtual terminal lines to the system.
Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
Enter a text string for your text banner message ending the
message with your delineator. The delineator is a percent
89