Ip Dhcp Snooping Database Renew - Dell S6000 Reference Manual

lease time
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.3.1.0
Version 7.8.1.0
Related show ip dhcp snooping
Commands

ip dhcp snooping database renew

Renew the binding table.
S6000
Syntax
ip dhcp snooping database renew
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Dynamic Host Configuration Protocol (DHCP)
Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
541