JUNOSe 11.1.x Service Availability Configuration Guide
SonetVT
IPsec Tunnel (ST)
Table 7 on page 50 lists the show redundancy clients command output fields.
Meaning
Table 7: show redundancy clients Output Fields
Related Topics
Monitoring the Redundancy History
Display information about dates, times, and the number of occurrences for starts
Purpose
and switchovers.
To display information about the number of occurrences for starts and switchovers.
Action
host1#show redundancy history
system up time:
last cold start:
last cold switchover:
last warm switchover:
activation statistics:
To display the additional redundancy history information:
host1#show redundancy history detail
system up time:
last cold start:
last cold switchover:
last warm switchover:
50
Monitoring the Redundancy History
supported
supported
Field Name
client
mode
Configuration
show redundancy clients
0 00:08:01
2004-07-26 10:44:25
2004-07-25 18:51:56
2004-07-25 20:58:57
cold starts:
switchovers:
cold:
warm:
consecutive warm:
0 00:08:01
2004-07-26 10:44:25
2004-07-25 18:51:56
2004-07-25 20:58:57
safe
safe
Field Description
High availability client.
High availability status of the client. Possible values:
supported or unsupported.
Safety level of the configuration based on whether
or not the client is supported or unsupported and in
case of those unsupported, whether or not the client
has been configured. For example, if an unsupported
client has been configured on a router with high
availability enabled, the configuration reads "unsafe".
92
21
147
0
Need help?
Do you have a question about the SERVICE AVAILABILITY - CONFIGURATION GUIDE V 11.1.X and is the answer not in the manual?