atm atm1483 advisory-rx-speed
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
atm atm1483 advisory-rx-speed speed
no atm atm1483 advisory-rx-speed
Command introduced before JunosE Release 7.1.0.
Sets an advisory receive (RX) speed that the LAC sends in the RX Connect-Speed AVP
[38] to the LNS. The no version restores the default behavior, in which the RX speed is
not sent to the LNS.
speed—Speed in the range 0–2147483647 kbps
Profile Configuration, Subinterface Configuration
Chapter 2: A Commands
149