Atm Clock Internal - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

atm clock internal

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] atm clock internal [ internalSource ]
Command introduced before JunosE Release 7.1.0.
Causes the ATM interface to generate the transmit clock internally. The no version causes
ATM interfaces to recover the clock from the received signal. If the internal clock is chosen
and no internal source is specified, then the internal clock source is taken from the line
module.
internalSource—One of the following:
module—Specifies that the internal clock is from the line module
chassis—Specifies that the internal clock is from the configured router clock
Interface Configuration
Chapter 2: A Commands
167