JunosE 11.2.x Command Reference Guide A to M
atm framing
Syntax
Release Information
Description
Options
Mode
170
atm framing framingType
no atm framing
Command introduced before JunosE Release 7.1.0.
Configures T3 or E3 framing on an ATM interface. The no version returns framing to the
default. For a T3 interface, the default value is cbitplcp. For an E3 interface, the default
value is g751plcp.
framingType—One of the following:
cbitadm—c-bit with ATM direct mapping for a DS3 (T3) interface
cbitplcp—c-bit with PLCP framing for a DS3 (T3) interface (default for T3)
g832adm—G.832 ATM direct mapping for an E3 interface
g751adm—G.751 ATM direct mapping for an E3 interface
g751plcp—G.751 PLCP mapping for an E3 interface (default for E3)
m23adm—M23 ATM direct mapping for a DS3 (T3) interface
m23plcp—M23 with PLCP framing for a DS3 (T3)
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.