Area Virtual-Link Transmit-Delay - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
area virtual-link transmit-delay
Syntax
Release Information
Description
Options
Mode
140
[ no ] area { areaId | areaIdInt } virtual-link ipAddress transmit-delay transmDelay
Command introduced before JunosE Release 7.1.0.
Defines an OSPF virtual link and the estimated time it takes to transmit a link-state
update packet on the virtual link. The no version removes the virtual link's transmit delay.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address associated with the virtual link neighbor
transmDelay—LSA transmit delay; an integer in the range 0–3600 seconds; default
value is 1 second
Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
