atm
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
atm { ubr | ubrpcr pcr | nrtvbr pcr scr mbs | rtvbr pcr scr mbs | cbr pcr }
no atm
Command introduced before JunosE Release 7.1.0.
Configures traffic-shaping parameters for PPPoA via domain-based parameters. The no
version removes the ATM traffic-shaping configuration.
ubr—Sets the traffic category to unspecified bit rate
ubrpcr—Sets the traffic category to unspecified bit rate with peak cell rate
nrtvbr—Sets the traffic category to non–real time variable bit rate
rtvbr—Set the traffic category to real time variable bit rate
cbr—Sets the traffic category to constant bit rate
pcr—Peak cell rate in the range 0–4294967295 Kbps
scr—Sustained cell rate in the range 0–4294967295 Kbps
mbs—Maximum burst size in the range 0–4294967295 Kbps
Domain Map Configuration
Chapter 2: A Commands
145