Logging N And; Administrative Tasks; Starting The System - 3Com 3C8S5007 - SuperStack II PathBuilder S500 Switch User Manual

3

Starting the System

L
OGGING
A
DMINISTRATIVE
This chapter describes the following:
Starting up the system
Logging on
User interfaces
Performing basic administrative tasks
Table 9 summarizes the administrative tasks described in this chapter and
indicates whether performing each task is required, recommended, or
optional.
Table 9 Administrative Task Summary
Task
Changing the Root Password
Changing the Default Console Port Baud
Rate
Adding User Accounts
Setting the Time and Date
Setting System Information
Setting Up Security Access
Setting up SNMP Management
For more information on each of the commands and parameters used in
this chapter, see Reference for Enterprise OS Software.
To start up your PathBuilder switch, plug one end of the power cord into
the rear panel of the switch and the other end into your power outlet.
Press the toggle switch to the On position.
O P
N AND
T
ASKS
Status of Task
Required
Do only if you want to attach a terminal
with a baud rate other than 9600.
Optional
Recommended
Required
Recommended
Recommended
ERFORMING