Table of Contents
Advertisement
374
C
16: M
S
HAPTER
ANAGING
ESSIONS
For example, the following command clears the sessions of all users on
VLAN red:
WX1200# clear sessions network vlan red
Displaying and
You can display information about a session by session ID. To find local
Clearing Network
session IDs, enter the display sessions command. You can view more
Sessions by
detailed information for an individual session, including authorization
Session ID
parameters and, for wireless sessions, packet and radio statistics.
For example, to display information about session 27, type the following
command:
WX1200> display session network session-id 27
Global Id: SESS-27-000430-835586-58dfe5a
State: ACTIVE
Port/Radio: 3/1
MAC Address: 00:00:2d:6f:44:77
User Name: EXAMPLE\ethan
IP Address: 192.168.142.170
Vlan Name: vlan-eng
Tag: 1
Session Timeout: 1800
Authentication Method: PEAP, using server 192.168.142.7
Session statistics as updated from AP:
Unicast packets in: 653
Unicast bytes in: 46211
Unicast packets out: 450
Unicast bytes out: 50478
Multicast packets in: 317
Multicast bytes in: 10144
Number of packets with encryption errors: 0
Number of bytes with encryption errors: 0
Last packet data rate: 2
Last packet signal strength: -67 dBm
Last packet data S/N ratio: 55
(For information about the fields in the output, see the
Wireless LAN
Switch and Controller Command
Reference.)
The verbose option is not available with the display sessions network
session-id command.
Advertisement
Table of Contents
