Add Lecs To Lecs-Order Database - 3Com CoreBuilder 9000 User Manual

Add LECS to
LECS-Order Database
Add a LECS to the LECS-order database in the CoreBuilder 9000 ATM
Enterprise Switch as the last element. If you want to change the order of
the LECS in the LECS-order database, delete the entries and reenter
them. You can add a LECS from any switch in which the LECS has been
enabled. Enter the ATM address of the LECS.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
LECS ATM Address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 3 2
47.00.00.00.00.00.3c.00.00.a0.00.00.00.00.a0.3e.00.00.01.00
Redundant LECS added.
The LECS is entered into the LECS-order database.
LAN Emulation Redundancy Setup
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(3) LOL: LECS ordered list
(2) AOL: Add to LECS ordered list
Format or Range
ATM address
1 1 5 3 2 [ATM Address]
The LECS is added to the LECS-order database.
Redundant LECS added
235