YASKAWA Motoman UP6 Instructions Manual page 300

• Perform the following inspection procedures prior to performing teach-
ing operations. If problems are found, correct them immediately, and be
sure that all other necessary processing has been performed.
- Check for problems in manipulator movement.
- Check for damage to the insulation and sheathing of external wires.
• Always return the programming pendant to its specified position after
use.
If the programming pendant is inadvertently left on the manipulator, fixture, or on the floor,
the manipulator or a tool could collide with it during manipulator movement, possibly
causing injuries or equipment damage.
C A U T I O N
6-2