Overrun / Shock Sensor Releasing - YASKAWA Motoman UP6 Instructions Manual

3.6 Overrun / Shock Sensor Releasing

3.6
Overrun / Shock Sensor Releasing
• To operate the manipulator with overrun released or with shock sensor
released, pay extra attention to the operating environment around you.
If the manipulator stops by overrun detection or shock sensor detection, release the overrun
or shock sensor by the following procedure and move the manipulator using the axis keys.
Operation
Select {ROBOT} under the top menu
*2
Select "RELEASE"
Explanation
*1
The overrun & shock sensor release display is shown.
The stopping condition when the shock sensor is detected can be selected "EMER-
GENCY STOP" or "HOLD" at the "SHOCK SENSOR STOP COMMAND". "E-STOP"
and "HOLD" are displayed alternately every time [SELECT] is pressed.
*2
"'" is displayed at the control group which detects overrun or shock sensor. If
"RELEASE" is selected, overrun or shock sensor is released and "CANCEL" is dis-
played.
C A U T I O N
Select {OVERRUN & S-SENSOR}
*3
Select "ALM RST"
D A T A
EDIT DISPLAY
O V E R R U N & S H O C K S E N S O R
SHOCK SENSOR STOP COMMAND :
OCCUR GRP OVERRUN
ROBOT1
R E L E A S E
!
3-18
UTILITY
L
R1 A
C
E-STOP
S-SENSOR
ALM RST
*1