2.1 Protection Through Security Mode Settings
2.1.2
User ID
User ID is requested when Editing Mode or Management Mode is operated.
User ID must be between 4 characters and 8, and they must be numbers and symbols
("0~9","-" and ".").
"
Changing a User I
In order to change the user ID, the XRC must be in Editing Mode or Management Mode.
Higher security modes can make changes to lower security modes.
Operation
Select {SETUP} under the top menu
Input current ID and press [Enter]
Explanation
*1
User ID registration display is shown.
*2
The character input line is displayed, and the message "Input current ID no. (4 to 8
digits)" is displayed.
Select {USER ID}
*3
Input new ID and press [Enter]
D A T A
EDIT
DISPLAY
USER ID
EDITING MODE
∗∗∗∗∗∗∗∗
MANAGEMENT MODE
∗∗∗∗∗∗∗∗
!Turn on servo power
D A T A
EDIT
DISPLAY
USER ID
EDITING MODE
∗∗∗∗∗∗∗∗
M A N A G E M E N T M O D E
∗∗∗∗∗∗∗∗
>
!Input current ID no.(4 to 8 digits)
2-6
*1
Select the desired ID
UTILITY
L
R1
C
S
UTILITY
L
R1
C
S
*2
*4