Oil Pressure Test - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:11:20 61TA0000_080_0009

Oil Pressure Test

NOTE: If the low oil pressure warning indicator stays on

with the engine running, check the engine oil level. If

the oil level is correct, do the following test:

1. With the engine stopped, remove the oil pressure

switch, and install an oil pressure gauge (A).

2. Start the engine. Shut it off immediately if the

gauge registers no oil pressure. Repair the problem

before continuing.

3. Allow the engine to reach operating temperature

(fan comes on at least twice). The pressure should

Engine Oil Temperature: 176 °F (80 °C)

Engine Oil Pressure:

At 3,000 rpm: 300 kPa (3.1 kgf/cm , 44 psi) min.

4. If the oil pressure is out of specifications, inspect

these items:

• Replace the oil filter (see page 8-11).

• Inspect the oil pressure relief valve (see page

• Check the oil screen for clogging.

• Inspect the oil pump (see page 8-17).

ＴＡ０８ＡＥ４Ａ３２２００００００００ＦＥＡＴ００

70 kPa (0.7 kgf/cm , 10 psi) min.

Table of Contents