Honda Accord 2008 Manual page 283

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:11:40 61TA0000_080_0022

Engine Lubrication

Oil Pump Overhaul (cont'd)

Oil Pump Installation

1. Make sure the No. 1 piston top dead center (TDC)

mark (A) lines up with the pointer (B).

2. Align the dowel pin (A) on the rear balancer shaft

with the mark (B) on the oil pump.

3. To hold the rear balancer shaft, insert a 6 mm long

pin punch (A) (Snap-on PPC108LA or equivalent)

into the maintenance hole in the balancer shaft

holder and through the rear balancer shaft.

4. Turn the plate (A) counterclockwise, to release the

lock, then push the oil pump chain auto-tensioner

arm (B), and set the first cam (C) to the first edge of

the rack (D). Insert a 3.0 mm (0.1 in.) diameter pin

(E) into the hole (F).

NOTE: If the chain tensioner is not set up as

discribed, the tensioner will become damaged.

Chapters

Table of Contents