Honda Accord 2008 Manual page 279

07/11/02 09:11:25 61TA0000_080_0018
Engine Lubrication
Oil Pump Overhaul (cont'd)
3. Check the pump housing-to-rotor axial clearance
between the rotor (A) and the pump housing (B). If
the pump housing-to-rotor axial clearance exceeds
the service limit, replace the oil pump.
Pump Housing-to-Rotor Axial Clearance
Standard (New): 0.035 0.070 mm
Service Limit:
＊０９
4. Check the pump housing-to-outer rotor radial
clearance between the outer rotor (A) and the
pump housing (B). If the pump housing-to-outer
rotor radial clearance exceeds the service limit,
replace the oil pump.
Pump Housing-to-Outer Rotor Radial Clearance
Standard (New): 0.150 0.210 mm
Service Limit:
＊１０
8-18
−
(0.0014 0.0028 in.) −
0.12 mm (0.005 in.)
A
−
(0.0059 0.0083 in.) −
0.23 mm (0.009 in.)
A
B
Balancer Shaft Inspection
1. Seat the balancer shaft by pushing it away from the
oil pump sprocket end of the oil pump.
2. Zero the dial indicator against the end of the
balancer shaft, then push the balancer shaft back
and forth and read the end play.
Balancer Shaft End Play
Front Balancer Shaft:
Standard (New): 0.063 0.108 mm
B
Service Limit:
3. Remove the pump housing.
−
(0.0025 0.0043 in.) −
0.14 mm (0.006 in.)
＊１１
＊１２