Oil Pump Chain Inspection - Honda Accord 2008 Manual

07/11/02 09:11:41 61TA0000_080_0023
5. Install the oil pump chain auto-tensioner (A).
＊２８
E
Replace.
D
B
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
6. Apply new engine oil to the threads of the oil pump
mounting bolts (B) and oil pump sprocket mounting
bolt (C), then Loosely install the oil pump (D) with a
new O-ring (E), then install the oil pump sprocket
(F).
7. Tighten the oil pump mounting bolts and the oil
pump sprocket mounting bolt.
8. Remove the 6 mm pin driver (G).
9. Remove the 3.0 mm (0.1 in.) diameter pin (A) from
the oil pump chain auto-tensioner.
＊２９
10. Install the oil pan (see page 7-32).
C
10 x 1.25 mm
44 N·m
(4.5 kgf·m,
33 lbf·ft)
F
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
A
8 x 1.25 mm
G
22 N·m
(2.2 kgf·m, 16 lbf·ft)
A

Oil Pump Chain Inspection

1. Remove the oil pan (see page 7-12).
2. Measure the oil pump chain auto-tensioner rod
length. If the length is over the service limit, replace
the oil pump chain (see page 8-24).
Oil Pump Chain Auto-Tensioner Rod Length
Service Limit: 13 mm (0.51 in.)
3. Install the oil pan (see page 7-32).
ＴＡ０８ＡＥ４Ａ３２２０００４３５１３ＭＡＡＴ００
＊０１
8-23 8-23