Water Passage Replacement - Honda Accord 2008 Manual

07/11/02 09:13:48 61TA0000_100_0010
Cooling System

Water Passage Replacement

1. Drain the engine coolant (see page 10-6).
2. Remove the splash shield (see step 24 on page 5-5).
3. Clean any dirt off the quick connector (A), the
thermostat cover, and the lower radiator hose.
＊０１
4. Pull out the lock (B) by hand, then wiggle the quick
connector loose, and remove it from the thermostat
cover. Do not use any tools to remove the quick
connector.
5. Remove the A/C compressor without disconnecting
the A/C hoses (see step 49 on page 5-9).
6. Remove the alternator (see page 4-34).
7. Remove the drive belt auto-tensioner (see page
4-33).
8. Remove the intake manifold (see page 9-3).
10-10
9. Remove the connecting pipe mounting bolts (A)
securing the connecting pipe (B).
A
D
10. Remove the connecting pipe, the water bypass
hose (C), and the positive crankcase ventilation
(PCV) hose (D).
B
11. Remove the water passage (A).
A
12. Remove the thermostat housing (B).
13. Remove the water pump (see page 10-5).
ＴＡ０８ＡＥ４Ａ１４４０００６５０９１ＫＢＡＴ００
C
B
＊０２
A
＊０３
B