Oil Filter Base Replacement; Oil Filter Feed Pipe Replacement - Honda Accord 2008 Manual

07/11/02 09:11:21 61TA0000_080_0012
Engine Lubrication

Oil Filter Base Replacement

1. Remove the oil filter (see page 8-11).
2. Remove the exhaust pipe bracket (A), then remove
the oil filter base (B).
＊０１
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
3. Clean the O-ring grooves and mating surface with
the oil filter base.
4. Install the oil filter base with new O-rings (C).
5. Install the oil filter (see page 8-11).
8-12 8-12
ＴＡ０８ＡＥ４Ａ３２２０００４３２４１ＫＢＡＴ０１
B
C
10 x 1.25 mm
Replace.
44 N·m
(4.5 kgf·m, 33 lbf·ft)

Oil Filter Feed Pipe Replacement

1. Remove the oil filter base (see page 8-12).
2. Remove the oil filter feed pipe.
3. Install the two 20 x 1.5 mm nuts (A) onto the new oil
A
filter feed pipe. Hold one nut with a wrench, then
use a second wrench to tighten the other nut.
4. Tighten the oil filter feed pipe to the oil filter base to
49 N·m (5.0 kgf·m, 36 lbf·ft), then remove the nuts
from the oil filter feed pipe.
5. Install the oil filter base (see page 8-12).
ＴＡ０８ＡＥ４Ａ３２２０００４３３１１ＫＢＡＴ０２
＊０１
＊０２
A