Honda Accord 2008 Manual page 313

07/11/02 09:13:54 61TA0000_100_0018
Cooling System
Radiator Replacement (cont'd)
12. Remove the fan shroud assemblies from the radiator.
＊０５
RADIATOR FAN
SHROUD ASSEMBLY
13. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions (4) are set securely.
14. Do the battery installation procedure (see page 22-90).
15. Fill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open (see step 6
on page 10-6).
10-18
ECT SENSOR 2
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
6 x 1.0 mm
7 N·m
(0.7 kgf·m, 5.1 lbf·ft)
RADIATOR CAP
RADIATOR
DRAIN PLUG
LOWER CUSHIONS (2)
A/C CONDENSER FAN
SHROUD ASSEMBLY