Honda Accord 2008 Manual page 277

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:11:23 61TA0000_080_0016

Engine Lubrication

Oil Pump Overhaul (cont'd)

Oil Pump Removal

1. Turn the crankshaft pulley so its top dead center

(TDC) mark (A) lines up with the pointer (B).

2. Remove the oil pan (see page 7-12).

3. To hold the rear balancer shaft, insert a 6 mm long

pin punch (A) (Snap-on PPC108LA or equivalent)

into the maintenance hole in the balancer shaft

holder and through the rear balancer shaft.

4. Turn the crankshaft counterclockwise to compress

the oil pump chain auto-tensioner.

5. Align the holes on the lock (A) and the oil pump

chain auto-tensioner (B), then insert a 3.0 mm

(0.1 in.) diameter pin (C) into the holes. Turn the

crankshaft clockwise to secure the pin.

NOTE: Check the oil pump chain auto-tensioner

cam position. If the position is not aligned, set the

first cam to the first edge of the rack.

6. Loosen the oil pump sprocket mounting bolt (A).

Chapters

Table of Contents