Honda Accord 2008 Manual page 291

07/11/02 09:12:26 61TA0000_090_0004
Intake Manifold and Exhaust System
Intake Manifold Removal and Installation (cont'd)
7. Remove the evaporative emission (EVAP) canister
hose (A) and the brake booster vacuum hose (B).
＊０５
B
8. Remove the water bypass hoses (C), then plug the
water bypass hoses.
9. Disconnect the manifold absolute pressure (MAP)
sensor connector (A) and throttle actuator
connector (B), then remove the wire harness
clamps (C).
＊０６
C
A
C
9-4
A C
B
10. Remove the intake manifold bracket.
11. Remove the vacuum hose (A) from the intake
manifold.
A
＊０７
＊０８