Operation Timing In Memory Expansion Mode And Microprocessor Mode; Electrical Characteristics - Renesas M30830T-RPD-E User Manual

5.3 Operation Timing in Memory Expansion Mode and Microprocessor Mode

As there are a flexible cable and other devices between this product and the target system, I/O timing
will differ from that of the actual MCU. Use the following as a reference when using the emulation pod.

5.4 Electrical Characteristics

Table 5.3 shows IC electrical characteristics of the user interface. Use this as a reference when using
the emulator.
Table 5.3 Electrical characteristics of port P15 (TC74HC4066)
Symbol
(1) The output signals (address, RD*, WR*, etc.) of the evaluation MCU mounted on this product
is output delayed by about 4 ns.
(2) It takes longer time to setup the data than the actual MCU by about 8 ns.
Parameter
R ON resistor
ON
R ON resistor difference
ON
I Switch input leak current
IN
Measuring condition
Vcc
2.0
4.5
4.5
12.0
( 59 / 74 )
Standard values
Min. Standard Max.
- 160 -
- 70 100
- 10 -
- - ±100
Unit
Ω
nA