2
Operation and Features
Memory list commands storing and restoring
Only 11 selected type of commands can be stored in the memory list.
Table 2- 1
memory list. Commands in the memory list can be stored in and restored
from the nonvolatile memory. When the U2723A USB Modular Source
Measure Unit is powered up, existing commands from the memory list is
restored from the nonvolatile memory automatically.
N O T E
Table 2-1 Type of commands that can be saved into the memory list
Remote SCPI command
[SOURce:]MEMory:CURRent:LIMit
[SOURce:]MEMory:CURRent:MEASure
[SOURce:]MEMory:CURRent:SOURce
[SOURce:]MEMory:CURRent:RANGe
[SOURce:]MEMory:VOLTage:LIMit
[SOURce:]MEMory:VOLTage:MEASure
[SOURce:]MEMory:VOLTage:SOURce
[SOURce:]MEMory:VOLTage:RANGe
[SOURce:]MEMory:SOURce:DELay:AUTO
[SOURce:]MEMory:SOURce:DELay
[SOURce:]MEMory:OUTPut
For more information, refer to the Agilent U2722A/U2723A USB Modular
Source Measure Units Programmer's Reference.
52
summarizes the type of commands that can be saved into the
After changing the measurement range command, a clamp command
should be added subsequently into the memory list.
AMM command
equivalent
CurrentLimit
MeasureCurrent
SourceCurrent
CurrentRange
VoltageLimit
MeasureVoltage
SourceVoltage
VoltageRange
AutoDelay
GlobalDelay
LocalDelay
Output
Description
Set the current limit
Make a current measurement
Set the drive current
Set the current range
Set the voltage limit
Make a voltage measurement
Set the drive voltage
Set the voltage range
Enable (ON) or disable (OFF) the auto delay mode
Set the global delay value
Set the local delay value
Enable (ON) or disable (OFF) the instrument output
U2722A/U2723A User's Guide