Table of Contents
Advertisement
Step 7. In the Internet Protocol (TCP/IP) Properties dialog box, click the
11-4).
Step 8. In the Local Area Connection Properties dialog box, click the
Step 9. In the Local Area Connection Status dialog box, click the
Step 10. Click the × button (2 in Figure 11-2) in the upper right of the Network and Dial-up
Connections window.
Specifying computer name
Follow these steps to specify the computer name:
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. The System Properties dialog box (Figure 11-5) appears. Click the
Figure 11-5). Press OK in the warning dialog box.
Figure 11-5
System Properties dialog box
Chapter 11
Setting and Using the Control and Management Facilities
.
LAN Setup
.
Network Identification
.
Configuring the Network
button (6 in Figure
OK
OK
button (3 in Figure 11-3).
Close
button.
button (1 in
Properties
231
Advertisement
Table of Contents
