SSANGYONG Y200
5) Slim brush
Clean up the section of defogger which is broken,
indicating like left picture, with the state which is
sticking masking tape, clean up with alcohol. After
mixing between paint of applying electric current
and thinner per interval of 15 minutes, paint 3
times. Before power is supplying, pull tape out of
the section broken, to finish up better, after drying
up completely (approximately after one day),
remove the edge painting unnecessary with knife.
Notice: After repairing, clean up glass with the
soft towel, grid line with the towel wet.
1. Disconnect cable of negative terminal of battery.
2. Disconnect defogger connector of tail gate.
YAD9D1M0
YAD9D1N0
3. After checking grid line, scraping approximately
6 mm to both section from disconnection of a line
with wooden spoon, clean up these section, a kind
of cloth wet with alcohol.
YAD9D1P0
BODY ELECTRICAL 9D-67