SSANGYONG Rexton Y200 Manual page 1577

Position of (1) : Position of soft contact
Position of (2) and (4) : Reverse position
SSANGYONG Y200
YAD9D970
Function of rear wipe
1. While switch of ignition turns on, turning switch of
wiper on, and then 1of relay is operated, so wiper
motor is controlled.
2. While wiper motor is operating, after contact signal
of "W" is feeding, so 2 of relay is operated, cause
wiper motor to reverse direction (angle of
revolution of wiper motor : 260 °)
3. As above the description, under the control of
wiper motor, if wiper switch is " off" , turn power of
wiper motor until position of 'P' is feeding, and
then back to the position of parking.
YAD9D980
BODY ELECTRICAL 9D-49
YAD9D990