SSANGYONG Rexton Y200 Manual page 1586

9D-58 BODY ELECTRICAL
Rear wiper assembly
1. After cap of wiper arm, remove nut of wiper and
blade of wiper.
YAD9D0L0
2. Remove trim of tail gate.
3. After connector of wiper motor is separated,
release fixing nut.
4. Remove wiper motor assembly from the tail gate.
YAD9D0M0
5. Install the reverse order of removal.
Wiper motor assembly
Bolt of motor bracket
Rear wiper blade
Torque of Tightening
YAD9D0N0
Bolt of motor
7 - 11 N•m
7 - 9 N•m
19 - 28 N•m
(44 - 52 lb-ft)
SSANGYONG Y200