Crypto Key Generate - Dell C9000 Series Reference Manual

crypto key generate

Generate keys for the SSH server.
C9000 Series
Syntax
crypto key generate {rsa | rsa1}
Parameters
rsa
rsa1
Defaults Key size 1024; if you enable FIPS mode, the key size is 2048.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.12.0
8.3.7.0
7.6.1.0
NOTE: Some of the parameters in this command require licensing to access. For
more information, contact your Dell Networking representative.
Enter the keyword rsa then the key size to generate a SSHv2
RSA host keys. The range is from 1024 to 2048 if you did not
enable FIPS mode; if you enabled FIPS mode, you can only
generate a 2048-bit key. The default is 1024.
NOTE:
For more information, contact your Dell Networking
representative.
Enter the keyword rsa1 then the key size to generate a SSHv1
RSA host keys. The range is from 1024 to 2048. The default is
1024.
NOTE:
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for FIPS mode on the S4810.
Introduced on the S4810.
Introduced on the S-Series.
You must have a license to access the FIPS mode.
This option is not available in FIPS mode.
Security 1979