Radius-Server Deadtime - Dell C9000 Series Reference Manual

Version
8.5.1.0
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.0

radius-server deadtime

Configure a time interval during which non-responsive RADIUS servers to authentication requests are
skipped.
C9000 Series
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server
deadtime command.
Parameters
seconds
Defaults 0 seconds
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Description
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a number of seconds during which non-responsive
RADIUS servers are skipped. The range is from 0 to 2147483647
seconds. The default is 0 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Security 1953