Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information Only Dell Networking Technical Support staff use this command.
enable secret
Change the password for the enable command.
C9000 Series
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password
[level level] command.
Parameters
level level
encryption-type
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the keyword level then a number as the
level of access. The range is from 1 to 15.
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 then a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Networking router.
Use this parameter only with a password that you copied from
the show running-config file of another Dell Networking
router.
Security
1938