Show Dot1X Interface; Defaults None Command Modes • Exec; Version 9.9(0.0); Exec Privilege - Dell C9000 Series Reference Manual

Version
7.4.1.0

show dot1x interface

Display the 802.1X information on an interface.
C9000 Series
Syntax
show dot1x interface interface
Parameters
interface
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.6.1.0
Example
Dell#show dot1x int
802.1x information on
-----------------------------
Dot1x Status:
Description
Introduced on the E-Series.
Enter one of the following keywords and slot/port or number
information:
•
•
• EXEC
•

EXEC privilege

Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series, S-Series, and E-Series.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Te 2/32
Te 2/32:
Enable
Security 1976